We offer a variety of Photo ID Products including: plastic cards, badge clips, cameras, backdrops, signature pads, along with Magicard, Fargo, and DataCard card printers. Browse the products below to find the perfect solution that meets your Photo ID requirements or Contact Us and have a Custom Card representative put together a Photo ID System that works best for you. We offer both stand-alone and networked configurations that allow you to full control the Photo ID System easily and securely. ..learn more
Photo ID Capture System with Tripod and Backdrop 
Largan Easy 200 Digital Camera -
- 2 Mega Pixels Digital Camera
- SD or MMC card slot
- 16 MB Internal Memory
- 256 MB External SD Card Option
- 4X Digital Zoom
- Rechargeable Lithium-ion battery pack
Cannon A640 and SX100, SX110
- 9.0 Mega Pixels, 1/2.3 inch type Charge Coupled Device (CCD)
- 4X Digital Zoom
- Color depth: 24-bit true color
- Auto, Auto w/ Red-eye Reduction, Flash On, Flash On w/ Red-eye Reduction, Flash Off; FE lock, Safety FE, Slow Synchro
Still Image: 3,456 x 2,592 (Large), 2,816 x 2,112 (Medium 1), 2,272 x 1,704 (Medium 2), 1,600 x 1,200 (Medium 3), 640 x 480 (Small), 3,456 x 1,944 (Wide screen) Movie: 640 x 480 (30 fps/30 fps LP), 320 x 240 (30 fps) available up to 4GB or 60 minutes per clip, 160 x 120 (15fps) up to 3 minutes per clip
Logitech QuickCam Orbit AF
- Auto focus system
- Ultra-high resolution 2-megapixel sensor with RightLight™ 2 Technology
- Color depth: 24-bit true color
- Video capture: Up to 1600 by 1200 pixels (HD quality)
- Frame rate: Up to 30 frames per second
- Still-image capture: 8 mega pixels (with software enhancement)
Card Five FaceSnap Module: 
- Autofocus system
- PC control stand alone camera with auto flash
- Auto Crop image to card format scale.
Topaz Digital Signature Pad 
- Autofocus system
- Ultra-high resolution 2-megapixel sensor with RightLight™ 2 Technology
- Color depth: 24-bit true color
- Video capture: Up to 1600 by 1200 pixels (HD quality)
- Frame rate: Up to 30 frames per second
- Still-image capture: 8 mega pixels (with software enhancement)
Questions to ask yourself when building your Card Photo ID & Badge System.
How will the card be carried/used?
Will the card suffer wear through being physically "swiped" through
a reader?
What card lifetime do we require?
What level of security protection do we need?
System Suggestions:
For long life cards (at least 5 years) which will
be carried everyday in a purse or pocket, and which must also offer the
highest level of tamper-proofing and counterfeit protection (e.g. drivers
licenses) the only solution is to use the SicuraTM Laminator to apply
a 1mil thick polyester laminate which contains a custom "hologram-like" optical
security device.
Cards produced in this way are very well protected against physical wear and tampering, and the optical security device will be very effective in preventing attempts to produce realistic copies.
This is a costly solution however, both in initial capital and in consumable costs, and it will be necessary to secure and account for every single overcoat panel (not just the rolls) to ensure that this vital authentication media cannot fall into the wrong hands and be used as part of a counterfeiting activity.
If the card is mainly going to be worn as a badge, or if a shorter lifetime is acceptable then Ultra's patented HoloKote™ technology will provide adequate physical protection, together with complete protection against forgery, at zero cost in consumables.
The capital cost is also zero if the built-in "Ultra Secure" logo included in the Rio 2eand the Tango 2e printers can provide adequate security protection, although the use of a unique,"custom" logo is recommended.
The use of a Custom Key security logo actually increases the security
protection to better than that provided by a custom laminate, yet it
still maintains the zero consumable cost and entails only the very low
start-up cost and turn around time of Ultra's unique Custom Key solution.
HoloKote with Custom Key is more secure than an laminate solution because of the ease of safeguarding the authentication device. Even a few panels of hologram laminate left on a roll for disposal could be retrieved from the garbage and used to produce fully authenticated fake cards. With HoloKote however, the authentication device is a single encrypted electronic key which cannot be duplicated and which is easily accounted for and safeguarded by locking it in the office safe when not in use.
HoloKote™ puts a daylight visible frosted security logo over the entire face of the card, which makes it ideal for cards which are carried or worn as badges.
To make the security logo more obvious at distances of up to 15 feet, the HoloKote™ system can be used with Ultra's HoloPatch™ card stock which highlights one of the security logos with a gold, 'super-diffuser' patch.